Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

Link zu dieser Vergleichsansicht

Beide Seiten der vorigen Revision Vorhergehende Überarbeitung
Nächste Überarbeitung
Vorhergehende Überarbeitung
wetter:boltek:software_stormforce [03.08.2011 20:21. ]
django [Kartenhintergrund]
wetter:boltek:software_stormforce [20.04.2018 09:02. ] (aktuell)
Zeile 1: Zeile 1:
 +====== Stormforce Installation und Konfiguration unter CentOS 5.x ======
 +===== Pakete (nach)installieren =====
 +Für den reibungslosen Betrieb von [[http://​stormforce.sourceforge.net/​|Stormforce]] für unseren [[wetter:​boltek:​hardware_ld-250|Blitzdedector]] benötigen wir noch neben der bereits vorhandenen Grundinstallation:​
 +  # yum list python mysql-server
 +  python.i386 ​                             installed
 +  mysql-server.i386 ​                       installed
 +Gemäß der **//​README//​** aus dem aktuellen stormforce-Paket installieren wir nun die für unsere Installationsumgebung benötigten Pakete nach.
 +  # yum install MySQL-python python-game python-numeric ImageMagick
 +Für die beiden Pakete **python-psyco** und **pyserial** müssen wir etwas Hand anlegen. Zuerst laden wir uns diese auf unseren Rechner:
 +  # cd /​usr/​local/​src
 +  # wget http://​rpms.netmindz.net/​el5/​i386/​RPMS.extras/​pyserial-2.2-4.el5.noarch.rpm
 +  # wget ftp://​ftp.uni-bayreuth.de/​pub/​redhat.com/​fedora/​linux/​extras/​6/​i386/​python-psyco-1.5.1-4.fc6.i386.rpm
 +Dann installieren wir diese beiden Pakete:
 +  # yum --nogpgcheck localinstall /​usr/​local/​src/​pyserial-2.2-4.el5.noarch.rpm
 +  # yum --nogpgcheck localinstall /​usr/​local/​src/​python-psyco-1.5.1-4.fc6.i386.rpm
 +
 +===== MySQL-Datenbank =====
 +==== Definition ====
 +Für den Betrieb von Stormforce legen wir uns nun einen User und eine Tabelle an. Dazu nutzen wir entweder direkt den Konsolenzugang,​ oder wir verwenden **phpmyadmin**.
 +<​code>​CREATE DATABASE `stormforce`;​
 +CREATE USER '​stormforceuser'​@'​localhost'​ IDENTIFIED BY '​Danny_Knaggs_is_a_geek';​
 +GRANT all on stormforce.* to '​stormforceuser'​@'​localhost';​
 +FLUSH PRIVILEGES;</​code>​
 +Erfolgt der Zugriff auf den MySQL-Server über das Netzwerk legen wir unseren User entsprechend an:
 +<​code>​CREATE USER '​stormforceuser'​@'​%'​ IDENTIFIED BY '​Danny_Knaggs_is_a_geek';​
 +GRANT all on stormforce.* to '​stormforceuser'​@'​%';​
 +FLUSH PRIVILEGES;</​code>​
 +
 +==== Zugangstest ====
 +Als nächstes überprüfen wir, ob der zuvor angelegt User/Zugang auch funktioniert.
 +<​code>​ # mysql -D stormforce -u stormforceuser -h mysqluser -p
 +Enter password: ***Danny_Knaggs_is_a_geek***
 +Welcome to the MySQL monitor. ​ Commands end with ; or \g.
 +Your MySQL connection id is 1886
 +Server version: 5.0.45 Source distribution
 +
 +Type '​help;'​ or '​\h'​ for help. Type '​\c'​ to clear the buffer.
 +
 +mysql> status;
 +--------------
 +mysql  Ver 08.15 Distrib 0.0.1, for redhat-linux-gnu (i686) using readline 5.0
 +
 +Connection id:          1886
 +Current database: ​      ​stormforce
 +Current user:           ​stormforceuser@mysqlserver
 +SSL:                    Not in use
 +Current pager: ​         stdout
 +Using outfile: ​         ''​
 +Using delimiter: ​       ;
 +Server version: ​        ​0.0.00 Source distribution
 +Protocol version: ​      00
 +Connection: ​            ​Localhost via UNIX socket
 +Server characterset: ​   latin1
 +Db     ​characterset: ​   latin1
 +Client characterset: ​   latin1
 +Conn.  characterset: ​   latin1
 +UNIX socket: ​           /​var/​lib/​mysql/​mysql.sock
 +Uptime: ​                3 days 6 hours 7 min 55 sec
 +
 +Threads: 4  Questions: 566224 ​ Slow queries: 0  Opens: 53  Flush tables: 1  Open tables: 47  Queries per second avg: 2.013
 +--------------
 +
 +mysql> use stormforce;
 +Database changed
 +mysql> show tables;
 +Empty set (0.00 sec)
 +
 +mysql> quit
 +Bye </​code>​
 +===== Stormforce =====
 +==== Download ====
 +Als nächstes holen wir uns die aktuelle Stormforce von der Projektseite bei Google.
 +   cd /​usr/​local/​src/​
 +   wget http://​stormforce.googlecode.com/​files/​stormforce-0.5.4.tar.bz2
 +==== Installation ====
 +Zu erst entpacken wir unser Paket.
 +<​code>#​ tar --bzip2 -xvf stormforce-0.5.3.tar.bz2
 +stormforce/
 +stormforce/​png/​
 +stormforce/​ttf/​
 +stormforce/​ogg/​
 +stormforce/​README
 +stormforce/​XML-README
 +stormforce/​xmldevice.py
 +stormforce/​netdevice.py
 +stormforce/​LICENSE
 +stormforce/​gpsdevice.py
 +stormforce/​stormforce.py
 +stormforce/​boltek-stormtracker/​
 +stormforce/​boltek-stormtracker/​st2sf/​
 +stormforce/​boltek-stormtracker/​boltek-sdk/​
 +stormforce/​boltek-stormtracker/​boltek-sdk/​Documentation
 +stormforce/​boltek-stormtracker/​boltek-sdk/​libboltek/​
 +stormforce/​boltek-stormtracker/​boltek-sdk/​driver/​
 +stormforce/​boltek-stormtracker/​boltek-sdk/​driver/​boltek.c
 +stormforce/​boltek-stormtracker/​boltek-sdk/​driver/​Makefile
 +stormforce/​boltek-stormtracker/​boltek-sdk/​driver/​77-boltek.rules
 +stormforce/​boltek-stormtracker/​boltek-sdk/​libboltek/​Makefile
 +stormforce/​boltek-stormtracker/​boltek-sdk/​libboltek/​demo.c
 +stormforce/​boltek-stormtracker/​boltek-sdk/​libboltek/​libboltek.c
 +stormforce/​boltek-stormtracker/​boltek-sdk/​libboltek/​stormpci.h
 +stormforce/​boltek-stormtracker/​st2sf/​stormpci.h
 +stormforce/​boltek-stormtracker/​st2sf/​st2sf.c
 +stormforce/​boltek-stormtracker/​st2sf/​Makefile
 +stormforce/​boltek-stormtracker/​st2sf/​libboltek.c
 +stormforce/​boltek-stormtracker/​st2sf/​LICENSE
 +stormforce/​boltek-stormtracker/​st2sf/​README
 +stormforce/​ogg/​kde_click3.ogg
 +stormforce/​ogg/​kde_digital2.ogg
 +stormforce/​ogg/​kde_error2.ogg
 +stormforce/​ttf/​micron55.ttf
 +stormforce/​ttf/​aldo.ttf
 +stormforce/​ttf/​7linedigital.ttf
 +stormforce/​ttf/​lcd1.ttf
 +stormforce/​ttf/​lcd2.ttf
 +stormforce/​png/​blank.png</​code>​
 +Für die spätere einfache Versionierung ändern wir den **stormforce**-Pfad auf //​**/​usr/​local/​src/​stormforce-0.5.4**//​ ab.
 +   mv /​usr/​local/​src/​stormforce /​usr/​local/​src/​stormforce-0.5.4
 +Wir haben es dann zukünftig leichter, wenn wir mehrere Versionen zum testen parallel vorhalten wollen.
 +Anschließend setzen wir wieder einen symbolischen Link mit dem gewünschten Zielpfadnamen auf unser neues Verzeichnis.
 +   ln -s /​usr/​local/​src/​stormforce-0.5.4 /​usr/​local/​src/​stormforce
 +==== Berechtigungen ====
 +Damit unser **user** auch Zugriff auf alle Dateien bekommt, ändern wir noch die Dateirechte ab
 +   chown -R django:​django stormforce
 +==== erster Programmstart ====
 +Nun ist es an der Zeit, **stormforce** das erste mal zu starten. ​
 +<​code>#​ python stormforce.py
 +
 +#########################################################################​
 +# Copyright/​License Notice (Modified BSD License) ​                      #
 +#########################################################################​
 +#########################################################################​
 +# Copyright (c) 2008, Daniel Knaggs ​                                    #
 +# All rights reserved. ​                                                 #
 +#                                                                       #
 +# Redistribution and use in source and binary forms, with or without ​   #
 +# modification,​ are permitted provided that the following conditions ​   #
 +# are met: -                                                            #
 +#                                                                       #
 +#   * Redistributions of source code must retain the above copyright ​   #
 +#     ​notice,​ this list of conditions and the following disclaimer. ​    #
 +#                                                                       #
 +#   * Redistributions in binary form must reproduce the above copyright #
 +#     ​notice,​ this list of conditions and the following disclaimer in   #
 +#     the documentation and/or other materials provided with the        #
 +#     ​distribution. ​                                                    #
 +#                                                                       #
 +#   * Neither the name of the author nor the names of its contributors ​ #
 +#     may be used to endorse or promote products derived from this      #
 +#     ​software without specific prior written permission. ​              #
 +#                                                                       #
 +#   * This Software is not to be used for safety purposes. ​             #
 +#                                                                       #
 +#   * You agree and abide the Disclaimer for your Boltek LD-250. ​       #
 +#                                                                       #
 +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ​  #
 +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT     #
 +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
 +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ​ #
 +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
 +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT      #
 +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
 +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
 +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT   #
 +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
 +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ​ #
 +#########################################################################​
 +
 +WARNING: If you do not agree to the above copyright/​license notice, cease using the software immediately and remove from your system.
 +
 +
 +
 +Information:​ Welcome to StormForce v0.5.4.
 +Information:​ Please report any bugs you find so I can fix them!
 +
 +Warning: The XML settings file doesn'​t exist, create one...
 +Information:​ The XML settings file has been created using the default settings. ​ Please edit it and restart StormForce once you're happy with the settings.
 +
 +Information:​ Closing down..</​code>​
 +Wie uns das Programm freundlich mittteilte, müssen wir noch die **XML**-Konfigurationsdatei bearbeiten.
 +==== Konfiguration ====
 +Mit dem Editor unserer Wahl bearbeiten wir nun die **stormforce-settings.xml**
 +  # vim stormforce-settings.xml
 +<code xml stormforce-settings.xml>​
 +
 +<?xml version="​1.0"​ ?>
 +<​StormForce>​
 +        <Setting DemoMode="​False"/>​
 +        <Setting DebugMode="​False"/>​
 +        <Setting DatabaseEngine="​1"/>​
 +        <Setting ConnectionString="​mysqlserver/​stormforce/​stormforceuser/​Danny_Knaggs_is_a_geek"/>​
 +        <Setting Fullscreen="​False"/>​
 +        <Setting LD250Port="/​dev/​ttyUSB0"/>​
 +        <Setting LD250PortCompression=""/>​
 +        <Setting LD250PortType="​XML"/>​
 +        <Setting LD250SkewAmount="​0.0"/>​
 +        <Setting LD250SquelchLevel="​0"/>​
 +        <Setting LD250UseUncorrectedStrikes="​False"/>​
 +        <Setting StormTrackerPort=""/>​
 +        <Setting StormTrackerPortCompression=""/>​
 +        <Setting StormTrackerPortType="​XML"/>​
 +        <Setting StormTrackerSkewAmount="​0.0"/>​
 +        <Setting StormTrackerSquelchLevel="​0"/>​
 +        <Setting StormTrackerUseUncorrectedStrikes="​False"/>​
 +        <Setting EFM100Port=""/>​
 +        <Setting EFM100PortCompression=""/>​
 +        <Setting EFM100PortType="​XML"/>​
 +        <Setting GPSPort=""/>​
 +        <Setting GPSPortCompression=""/>​
 +        <Setting GPSPortType="​XML"/>​
 +        <Setting TRACEnabled="​True"/>​
 +        <Setting TRACSensitivity="​10"/>​
 +        <Setting TRACStormWidth="​30"/>​
 +        <Setting CloseAlarmArguments=""/>​
 +        <Setting SevereAlarmArguments=""/>​
 +        <Setting TCPListenerPort="​0"/>​
 +        <Setting TCPListenerPortCompression=""/>​
 +        <Setting UDPListenerPort="​0"/>​
 +        <Setting UDPListenerPortCompression=""/>​
 +        <Setting MulticastListenerAddress=""/>​
 +        <Setting MulticastListenerPort="​0"/>​
 +        <Setting MulticastListenerPortCompression=""/>​
 +        <Setting MulticastListenerTTL="​0"/>​
 +        <Setting StrikeShape="​1"/>​
 +        <Setting SmallCrosshair="​True"/>​
 +        <Setting ShowRedDotOnStrike="​True"/>​
 +        <Setting ReconstructionFile=""/>​
 +        <Setting ShowRangeCircles="​False"/>​
 +        <Setting ServerModeImage=""/>​
 +        <Setting SoundEnabled="​False"/>​
 +        <Setting CurlArguments=""/>​
 +        <Setting UserCopyright="​Lightning Data (c) 2008 - Django"/>​
 +        <Setting ZoomDistance="​300"/>​
 +</​StormForce>​
 +</​code>​
 +==== Stormforce-Aufruf ====
 +Nachdem wir unsere Konfiguration erfolgreich abgeschlossen haben, rufen wir nunmehr **stormforce** zum ersten male richtig auf. //( Vorausgesetzt wir haben die Berechtigungen auf die Device-Datei entsprechend geändert, siehe hierzu [[wetter:​boltek:​hardware_ld-250|Hardware LD-250]] )//
 +  $ python stormforce.py
 +<​code>​
 +#########################################################################​
 +# Copyright/​License Notice (Modified BSD License) ​                      #
 +#########################################################################​
 +#########################################################################​
 +# Copyright (c) 2008, Daniel Knaggs ​                                    #
 +# All rights reserved. ​                                                 #
 +#                                                                       #
 +# Redistribution and use in source and binary forms, with or without ​   #
 +# modification,​ are permitted provided that the following conditions ​   #
 +# are met: -                                                            #
 +#                                                                       #
 +#   * Redistributions of source code must retain the above copyright ​   #
 +#     ​notice,​ this list of conditions and the following disclaimer. ​    #
 +#                                                                       #
 +#   * Redistributions in binary form must reproduce the above copyright #
 +#     ​notice,​ this list of conditions and the following disclaimer in   #
 +#     the documentation and/or other materials provided with the        #
 +#     ​distribution. ​                                                    #
 +#                                                                       #
 +#   * Neither the name of the author nor the names of its contributors ​ #
 +#     may be used to endorse or promote products derived from this      #
 +#     ​software without specific prior written permission. ​              #
 +#                                                                       #
 +#   * This Software is not to be used for safety purposes. ​             #
 +#                                                                       #
 +#   * You agree and abide the Disclaimer for your Boltek LD-250. ​       #
 +#                                                                       #
 +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ​  #
 +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT     #
 +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR #
 +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT ​ #
 +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, #
 +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT      #
 +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, #
 +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY #
 +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT   #
 +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE #
 +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ​ #
 +#########################################################################​
 +
 +WARNING: If you do not agree to the above copyright/​license notice, cease using the software immediately and remove from your system.
 +
 +
 +
 +Information:​ Welcome to StormForce v0.5.4.
 +Information:​ Please report any bugs you find so I can fix them!
 +
 +Information:​ Reading XML settings...
 +
 +
 +Information:​ MySQL support is available.
 +Information:​ Using MySQL as the database backend.
 +Information:​ Connecting to database...
 +Information:​ Updating database structure...
 +Information:​ Initialising history...
 +Information:​ Closing database connection...
 +Information:​ Initialising COM port for LD-250 via /​dev/​ttyUSB0...
 +Information:​ Squelch level has successfully been set to 0.
 +Information:​ COM port opened! Waiting for lightning data from LD-250...
 +Information:​ Server mode without uploading enabled.
 +Information:​ Enabling Cron...
 +Information:​ Entering main loop...
 +</​code>​
 +Folgender Bildschirm wird uns bei erfolgreichem Programmstart gezeigt.
 +
 +{{ :​ws:​bildschirmfoto-stormforce_v0.5.3.png?​500 }}
 +
 +Mit der Taste "​**Q**"​ können wir das Programmm bei Bedarf beenden.
 +===== Individuelle Anpassungen =====
 +==== Startscript für Programmstart ====
 +Für den Porgrammstart verlinken wir das beim Programmpaket enthaltene Startscript.
 +  # ln -s /​usr/​local/​src/​stormforce/​bin/​stormforce.sh /​usr/​local/​bin/​
 +
 +==== Starter anlegen ====
 +Zum Starten von Stormforce legen wir uns am Desktop einen entsprechenden Starter an. Das Icon => {{:​ws:​stormforce.png}} Legen wir am besten unter **/​usr/​share/​pixmaps/​** ab.
 +
 +{{ :​ws:​stormforce_starter.png?​200 }} 
 +==== Automatischer Programmstart nach erfolgter Anmeldung ====
 +Damit unser **Boltek LD-250** nun sofort nach einer erfolgreichen Useranmeldung von //​**Stormforce **// ausgelesen werden kann, legen wir uns einen Autostarter an.
 +
 +Hierzu legen wir zu erst folgendes Verzeichnis an:
 +   # mkdir /​home/​django/​.config/​autostart
 +Dort legen wir die Datei **__stormforce.desktop__** mit folgendem Inhalt an: 
 +<​code>​[Desktop Entry]
 +Name=Stormforce
 +Encoding=UTF-8
 +Version=1.0
 +Exec=stormforce-start.sh
 +X-GNOME-Autostart-enabled=true</​code>​
 +Somit wird beim nächsten Anmelden am X-Gnome-Desktop das Programm **stormforce** automatisch gestartet.
 +
 +{{ :​ws:​stormforce_hardcopy.png?​450 }}
 +==== Update des Bildes auf unserem Webserver/​Vhost ====
 +=== storm2web.sh ===
 +Zum Kopieren unserer, von Stormforce alle 10 Sekunden akutalisierten,​ Bildschirmhardcopy auf unseren Webserver, legen wir ein kleines Shellscript an:
 +   # vim /​usr/​local/​bin/​storm2web.sh
 +<code bash storm2web.sh >#​!/​bin/​sh ​
 +# Script zum "​Hochladen"​ des Strormforce-Bildes auf den
 +# virtuellen Host "​Webcam"​
 +# (c) Michael Nausch - 29.12.2008
 +
 +WORKDIR="/​usr/​local/​src/​stormforce/"​
 +QUELLE="/​usr/​local/​src/​stormforce/​stormforce_picture.png"​
 +ZIEL="/​var/​www/​html/​website/​record/"​
 +SLEEP=10
 +
 +cd $WORKDIR
 +while true
 +do
 +# cd $WORKDIR_1
 + rsync -av $QUELLE $ZIEL"​stormforce_2.png"​
 + sleep $SLEEP
 +done
 +</​code>​
 +Anschließend versehen wir unser kleines shell-script noch mit dem **"​X"​-Rechten**.
 +   # chmod +x /​usr/​local/​bin/​storm2web.sh
 +
 +=== Stormforce-Konfiguration ===
 +Die Dateibezeichnung **stormforce_picture.png** tragen wir auch in der Konfigurationsdatei von Stormforce **//​stormforce-settings.xml
 +//** ein:
 +  # vim stormforce-settings.xml
 +<code xml stormforce-settings.xml>​
 +
 +<?xml version="​1.0"​ ?>
 +<​StormForce>​
 +        <Setting DemoMode="​False"/>​
 +        <Setting DebugMode="​False"/>​
 +
 +...
 +        <Setting ServerModeImage="​stormforce_picture.png"/>​
 +        <Setting SoundEnabled="​False"/>​
 +        <Setting CurlArguments=""/>​
 +        <Setting UserCopyright="​Lightning Data (c) 2008 - Django"/>​
 +        <Setting ZoomDistance="​300"/>​
 +</​StormForce>​
 +</​code>​
 +=== service stormforce ===
 +Damit nun beim Systemstart automatisch der automatische //​Bildsyncronisierungscopyjob//​ legen wir uns nachfolgendes Systemstartscript unter **/​etc/​init.d/​** ab.
 +  # vim /​etc/​init.d/​stormforce
 +<code bash stormforce> ​
 +
 +#!/bin/sh
 +#
 +# chkconfig: 2345 79 31
 +# description:​ cyclic Stormforce-Map Update
 +#
 +# processname:​ stormforce
 +#
 +
 +# Source function library.
 +. /​etc/​rc.d/​init.d/​functions
 +
 +# Source networking configuration.
 +. /​etc/​sysconfig/​network
 +
 +# Check that networking is up.
 +[ ${NETWORKING} = "​no"​ ] && exit 0
 +
 +prog=storm2web.sh
 +stormforce_prg=/​usr/​local/​bin/​$prog
 +
 +# Source an auxiliary options file if we have one, and pick up OPTIONS, ​                                                                                                    
 +if [ -r /​etc/​sysconfig/​$prog ]; then
 +    . /​etc/​sysconfig/​$prog
 +fi
 +
 +start() {
 +    echo -n $"​Starting $prog: "
 +#    $stormforce_prg start
 +    $stormforce_prg &
 +    RETVAL=$?
 +    echo
 +    [ $RETVAL -eq 0 ] && touch /​var/​lock/​subsys/​$prog
 +}
 +stop() {
 +    echo -n $"​Stopping $prog: "
 +   /​usr/​bin/​killall $prog
 +#    $stormforce_prg stop
 +    RETVAL=$?
 +    echo
 +    [ $RETVAL -eq 0 ] && rm -f /​var/​lock/​subsys/​$prog
 +}
 +
 +restart() {
 +    stop
 +    start
 +}
 +
 + 
 +# See how we were called.
 +case "​$1"​ in
 +    start)
 +        start
 +    ;;
 +    stop)
 +        stop
 +    ;;
 +    restart)
 +        restart
 +    ;;
 +    *)
 +        echo $"​Usage:​ $0 {start|stop|restart}"​
 +        exit 1
 +esac
 +
 +exit $RETVAL</​code>​
 +Damit der "​service"​ automatisch beim Systemstart anläuft, aktivieren wir diesen mit:
 +   # chkconfig stormforce on
 +Die Überprüfungung ob der Dienst (Daemon) stormforce wirklich bei jedem Systemstart automatisch mit gestartet werden, kann durch folgenden Befehle erreicht werden: ​
 +   # chkconfig --list | grep stormforce
 +stormforce ​     0:Aus   ​1:​Aus ​  ​2:​Ein ​  ​3:​Ein ​  ​4:​Ein ​  ​5:​Ein ​  6:Aus
 +
 +Den Daemon starten wir nun initial mit:
 +   # service stormforce start
 +==== Kartenhintergrund ====
 +Einen passenden Kartenhintergrund können wir uns entweder über das [[http://​www.openstreetmap.org|freie Kartenprojekt von Openstreetmap]],​ bei den [[http://​earthobservatory.nasa.gov/​Features/​BlueMarble/​|Blue Marble Satellitenbilder der NASA]], oder 
 +mit Hilfe des [[http://​www.primap.com/​de/​index.html|MapCreator 2.0 von primap]] erstellen. Genau in der Reihenfolge bin ich vorgegangen,​ bei letzterem bin ich dann auf Grund er schnellen, einfachen und guten Ergebnisse hängen geblieben.
 +
 +{{ :​ws:​blitzkarte_mit_ort_und_namen.png?​400 }}
 +
 +Die Karte hat eine Größe von 600 x 600 Pixel, mit dem Standort in der Bildmitte. Die Karte selbst hat dabei eine Ausdehnung (Radius um den Standort) von 300 Meilen bzw. ca. 480 Kilometer.
 +
 +Unsere eigene neue Karte speichern wir dann als **//​map-300.png//​** im Verzeichnis **//png//** ab.
 +   # ​ ll /​usr/​local/​src/​stormforce/​png/​
 +   ​-rw-r--r-- 1 root root 362544 28. Sep 11:36 map-300.png
 +
 +
  
  • wetter/boltek/software_stormforce.txt
  • Zuletzt geändert: 20.04.2018 09:02.
  • (Externe Bearbeitung)